Raspberry Pi Compute Module 3 Development Kit (Type B)

Title Default Title
Qty:

Description

  • Development kit type B
  • Includes a CM3 IO Board, a 7-inch HDMI LCD, a temperature sensor, an IR Remote Controller, etc.
  • Features an IO Board that extends all kinds of interfaces from the CM3, such as USB, HDMI
  • The HDMI LCD has a 1024×600 high resolution and capacitive touch control
  • Comes with the Raspberry Pi Compute Module 3 (CM3)
  • 1GB RAM, 4GB eMMC Flash

The Raspberry Pi Compute Module 3 Development Kit (Type B) is designed to let you experiment and evaluate the Compute Module 3 quickly, reducing your development cycle.

The kit includes many components, such as a 7-inch HDMI LCD. If you already have a touch-screen LCD and you want a version without it, you might want to get the Type A version instead.

  • 1 x Compute Module IO Board Plus
  • 1 x 7-inch HDMI LCD (C)
  • 1 x DS18B20
  • 1 x IR remote controller
  • 1 x LCD adapter
  • 1 x HDMI cable
  • 1 x HDMI adapter
  • 1 x USB adapter
  • 1 x RPi screws pack (4pcs)
  • 1 x 22PIN FFC
  • 1 x RPi Zero V1.3 Camera Cable 15cm
  • 1 x Power adapter US standard 5V/2.5A USB output
  • 1 x USB type A plug to micro B plug cable 35cm
  • 2 x USB type A plug to micro B plug cable 120cm
  • 2 x Jumper Wire 4-pin to separated pins
  • 2 x Jumper Wire 2-pin 2.54-pitch 200mm
  • 1 x Compute Module 3

7inch HDMI LCD (C)

  • 1024×600 high resolution
  • Capacitive touch control
  • Supports Raspberry Pi
  • Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
  • Supports BB Black, comes with Angstrom image
  • For other mini-PCs, driver is required and should be developed by users
  • Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen
  • HDMI interface for displaying, USB interface for touch control
  • Backlight can be turned off to lower power consumption

Compute Module IO Board Plus

  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation
  • Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs
  • Arduino connectivity, also supports Arduino shields
  • 1-WIRE interface, for connecting single-bus devices like DS18B20
  • 4x keys, 4x LEDs, 1x Buzzer, for I/O testing
  • Onboard USB HUB, allows connecting more USB devices
  • IR receiver, IR remote control is available
  • Onboard USB TO UART, for serial debugging
  • Sensor interface
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for Arduino interface, 5-ch for sensors)
  • 16-bit DAC, 2-ch
  • Onboard RTC, one of the most common and useful functions
  • Weight: 0.664 kg