Carbide 3D T-Track and Clamp Kit - XXL

Title Default Title
Qty:

Description

  • Carbide3D T-Track and Clamp Kit (for XXL version)
  • Provides a flexible and reliable way to hold down material 
  • Designed for your Shapeoko CNC Router
  • Includes 4 different length hex bolts, wooden clamps and hardware
  • Only compatible for the Shapeoko 3

This Carbide3D T-Track and Clamp Kit - XXL provides a flexible and reliable way to hold down material to your Shapeoko CNC Router. There are 4 different length hex bolts included with the kit. To get the most out of your hold down clamps, use a piece of drop material slightly thicker than the material you are cutting.

If the back end of the clamp is higher than the material, you will get greater downward pressure and reduce the chances of your part coming free or shifting during heavy cutting. The clamps are made from red oak material, 1/2” thick measuring 1” wide by 4” long. You will need a #201 1/4” cutter to run this job.

  • 4 x 1-1/4” Hex Bolt
  • 4 x 1-3/4” Hex Bolt
  • 4 x 2” Hex Bolt
  • 4 x 2-1/4” Hex Bolt
  • 4 x Thumb Nut
  • 4 x Clamp
  • T-tracks
  • 2 x Side filler
  • Middle Filler
  • 50 x #8 x 1/2” Screw
  • 30 x #8 x 1-1/4” Screw
  • 1 x #2 Phillips Driver
  • 1 x 5/64” Drill Bit

PDF Files

  • Material Thickness / Bolt Length
  • 0-1/2” (0-12mm) / 1-1/4” Bolt
  • 1/2” - 3/4” (12-20mm) / 1-3/4” Bolt
  • 3/4” - 1” (20-26mm) / 2” Bolt
  • 1-1/4” (26-32mm) / 2-1/4” Bolt